Optimised Condition Catalytic Upgrading of Agbabu Bitumen in the Presence of Rice Husks

Yunusa Mohammed Oseni, Umar Aroke, Baba Jibril

Abstract

In this study, the optimisation of bitumen collected from Agbabu Ondo State, Nigeria, was upgraded in the presence of rice husks in a nitrogen environment using a 100 ml autoclave batch reactor with the aid of the design expert software. Response surface methodology (RSM) was used to determine the optimum conditions for the bitumen upgrading in the presence of rice husks using the Box-Behnken Designed Experiment (BBD). Three mesoporous aluminosilicate catalysts (NiMo/ZSM-5, CoMo/HZSM-5 and Mo/HZSM-5) were used to upgrade the bitumen at the obtained optimised point. The bitumen sample was characterised by saturates (53.48 wt.%), aromatics (12.84 wt.%), resins (15.37 wt.%), asphaltenes (8.86 wt.%) and an initial viscosity of 86.78 Pa.s, API gravity of 7.87 o and density of 1.0153 kg/l. The GC-MS result revealed that there were 42 chemical compounds present in the raw bitumen. The XRF result for the rice husks revealed that the silica to Alumina (SiO2/Al2O3) ratio was 11.89:1. RSM optimisation of the experimental runs with the autoclave reactor gave an optimum condition (Temperature of 345.716 oC, Reaction time of 30 min, and Rice husks of 1.0 wt.%) without employing any of the three mesoporous aluminosilicate catalysts. The responses obtained for the upgraded oil were viscosity 8.34 Pa.s, API gravity 24.520 o, residue yield 22.39 w/w% and light oil yield 50.064 w/w%. The experimental run with NiMo/ZSM-5 catalyst at the optimum conditions was observed to be more effective in the catalytic thermal cracking of the bitumen upgrading process, as the light oil yield was 70.42 w/w%, viscosity of 2.060 Pa.s, API gravity of 29.826o and residue yield of 10.66 w/w% compared to what was obtained from CoMo/HZSM-5 and Mo/HZSM-5 mesoporous aluminosilicate catalysts. The FT-IR and GC-MS of the upgraded Agbabu bitumen testified that the level of upgrade of the bituminous oil was satisfactory as the raw Agbabu bitumen had an initial viscosity of 86.780 Pa.s, API gravity of 7.87 o and density of 1.0153 kg/l in which all the initial core properties of the bitumen have shifted satisfactorily after the bitumen upgrade to produce light oil that fell within the acceptable range of refinery feedstock specifications for refining processes in the vacuum distillation unit (VDU).


10.22178/pos.103-11


Keywords


Heavy Oil; Bitumen; Bitumen Upgrading; Rice Husks; Mesoporous Aluminosilicate Catalysts

Full Text:

PDF


References


1. Demirbas, A., Bafail, A., & Nizami, A.-S. (2016). Heavy oil upgrading: Unlocking the future fuel supply. Petroleum Science and Technology, 34(4), 303–308. doi: 10.1080/10916466.2015.1136949

2. Spiecker, P. M., Gawrys, K. L., Trail, C. B., & Kilpatrick, P. K. (2003). Effects of petroleum resins on asphaltene aggregation and water-in-oil emulsion formation. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 220(1–3), 9–27. doi: 10.1016/s0927-7757(03)00079-7

3. Speight, J. G. (2007). The chemistry and technology of petroleum (4th ed.). Boca Raton: CRC Press.

4. Li, J., Wang, X., Tang, X., Zhang, M., Zheng, X., Wang, C., & Tang, Z. (2019). Upgrading of heavy oil by thermal treatment in the presence of alkali-treated Fe/ZSM-5, glycerol, and biomass. Fuel Processing Technology, 188, 137–145. doi: 10.1016/j.fuproc.2019.02.010

5. Babaso, P. N., & Sharanagouda, H. (2017). Rice Husk and Its Applications: Review. International Journal of Current Microbiology and Applied Sciences, 6(10), 1144–1156. doi: 10.20546/ijcmas.2017.610.138

6. Nandiyanto, A. B. D., Oktiani, R., & Ragadhita, R. (2019). How to Read and Interpret FTIR Spectroscope of Organic Material. Indonesian Journal of Science and Technology, 4(1), 97. doi: 10.17509/ijost.v4i1.15806

7. Abdulkadir, I., Uba, S., Salihu A., A., & Almustapha, M. N. (2016). A Rapid Method of Crude Oil Analysis Using FT-IR Spectroscopy. Nigerian Journal of Basic and Applied Sciences, 24(1), 47. doi: 10.4314/njbas.v24i1.8

8. Ahmad, I., Sohail, S. M., Khan, H., Khan, R., & Ahmad, W. (2108). Characterisation of Petroleum Crude Oils by Fourier Transform Infrared (FT-IR) and Gas Chromatography-Mass Spectrometry. Petroleum and Petrochemical Engineering Journal, 2(2), 1–7.

9. Coates, J. (2000). Interpretation of Infrared Spectra, A Practical Approach. Encyclopedia of Analytical Chemistry. doi: 10.1002/9780470027318.a5606

10. Jiang, J., Wang, Q., Wang, Y., Tong, W., Xiao, B., & Xiao, B. (2007). Gc/Ms Analysis Of Coal Tar Composition Produced From Coal Pyrolysis. Bulletin of the Chemical Society of Ethiopia, 21(2). doi: 10.4314/bcse.v21i2.21202

11. Bosio, A., Gianoncelli, A., Zacco, A., Borgese, L., Rodella, N., Zanotti, D., Depero, L. E., Siviero, G., Cinosi, A., Bingham, P. A., & Bontempi, E. (2013). A new nanotechnology of fly ash inertization based on the use of silica gel extracted from rice husk ash and microwave treatment. Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanoengineering and Nanosystems, 228(1), 27–32. doi: 10.1177/1740349913490683

12. Treacy, M. M., & Higgins, J. B. (2001). Collection of Simulated XRD Powder Patterns for Zeolites (4th ed.). New York: Elsevier.

13. Pavlačková, Z., Košová, G., Žilková, N., Zukal, A., & Čejka, J. (2006). Formation of Mesopores in ZSM-5 by Carbon Templating. Scientific Bases for the Preparation of Heterogeneous Catalysts, 905–912. doi: 10.1016/s0167-2991(06)80996-1

14. Yan, Y., Guo, X., Zhang, Y., & Tang, Y. (2015). Future of nano-/hierarchical zeolites in catalysis: gaseous phase or liquid phase system. Catalysis Science & Technology, 5(2), 772–785. doi: 10.1039/c4cy01114g

15. Zhang, K., & Ostraat, M. L. (2016). Innovations in hierarchical zeolite synthesis. Catalysis Today, 264, 3–15. doi: 10.1016/j.cattod.2015.08.012

16. Fernandez, C., Stan, I., Gilson, J., Thomas, K., Vicente, A., Bonilla, A., & Pérez‐Ramírez, J. (2010). Hierarchical ZSM‐5 Zeolites in Shape‐Selective Xylene Isomerization: Role of Mesoporosity and Acid Site Speciation. Chemistry – A European Journal, 16(21), 6224–6233. doi: 10.1002/chem.200903426

17. Chou, Y. H., Cundy, C. S., Garforth, A. A., & Zholobenko, V. L. (2006). Mesoporous ZSM-5 catalysts: Preparation, characterisation and catalytic properties. Part I: Comparison of different synthesis routes. Microporous and Mesoporous Materials, 89(1–3), 78–87. doi: 10.1016/j.micromeso.2005.10.014

18. Agliullin, M. R., Talzi, V. P., Filippova, N. A., Bikbaeva, V. R., Bubennov, S. V., Prosochkina, T. R., Grigorieva, N. G., Narender, N., & Kutepov, B. I. (2018). Two-step sol–gel synthesis of mesoporous aluminosilicates: highly efficient catalysts for the preparation of 3,5-dialkylpyridines. Applied Petrochemical Research, 8(3), 141–151. doi: 10.1007/s13203-018-0202-0

19. Guo, K., Li, H., & Yu, Z. (2016). In-situ heavy and extra-heavy oil recovery: A review. Fuel, 185, 886–902. doi: 10.1016/j.fuel.2016.08.047

20. Scott, D. S., Radlein, D., Piskorz, J., Majerski, P., & deBruijn, Th. J. W. (2001). Upgrading of bitumen in supercritical fluids. Fuel, 80(8), 1087–1099. doi: 10.1016/s0016-2361(00)00174-5

21. Ates, A., Azimi, G., Choi, K.-H., Green, W. H., & Timko, M. T. (2014). The role of catalyst in supercritical water desulfurisation. Applied Catalysis B: Environmental, 147, 144–155. doi: 10.1016/j.apcatb.2013.08.018

22. Avbenake, O. P., Al-Hajri, R. S., & Jibril, B. Y. (2019). Catalytic upgrading of heavy oil using NiCo/γ-Al2O3 catalyst: Effect of initial atmosphere and water-gas shift reaction. Fuel, 235, 736–743. doi: 10.1016/j.fuel.2018.08.074

23. Yusuf, A., Al-Hajri, R. S., Al-Waheibi, Y. M., & Jibril, Baba. Y. (2016). In-situ upgrading of Omani heavy oil with catalyst and hydrogen donor. Journal of Analytical and Applied Pyrolysis, 121, 102–112. doi: 10.1016/j.jaap.2016.07.010

24. Kumar, S., & Mahto, V. (2016). Emulsification of Indian heavy crude oil in water for its efficient transportation through offshore pipelines. Chemical Engineering Research and Design, 115, 34–43. doi: 10.1016/j.cherd.2016.09.017

25. Li, J., Wang, X., Tang, X., Zhang, M., Zheng, X., Wang, C., & Tang, Z. (2019). Upgrading of heavy oil by thermal treatment in the presence of alkali-treated Fe/ZSM-5, glycerol, and biomass. Fuel Processing Technology, 188, 137–145. doi: 10.1016/j.fuproc.2019.02.010


Article Metrics

Metrics Loading ...

Metrics powered by PLOS ALM

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Copyright (c) 2024 Yunusa Oseni, Umar Aroke, Baba Jibril

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.