Improvement of Regulatory Requirements for Ensuring the Quality of Underground Gas Pipelines in Conditions of Corrosion Fatigue

Larysa Yuzevych, Ruslan Skrynkovskyy, Mykola Mykyychuk

Abstract

The article develops recommendations for improvement of normative documents concerning the quality of underground metal pipelines (gas pipelines) under conditions of fatigue and the impact of an aggressive environment, taking into account cathodic (electrochemical) protection. It is established that the basis of information provision of normative documents is the method which includes the following main criteria: the value of the minimum current density of cathode protection; minimum security potential; maximum protective potential, minimal displacement of protective potential; strength criteria of pipe material; criteria of strength of phase layer between the metal and the coating; the strength of the metal in the defect of the insulation coating. It has been found out that the system "metal pipe - insulating dielectric coating" is characterized by such basic procedures as: identification of hazards; various variants of load asymmetry; evaluation of the boundary and optimal values of potentials and currents for the system of cathodic protection of the pipeline. The prospect of further research in this area is determination of the complex indicator of quality and reliability of the linear part of underground main gas pipelines on the basis of research results (submitted information support).



Keywords


steel gas pipeline; normative and technical documentation; polarization potential; corrosion fatigue; quality; information support



References


1. Skrynkovskyy, R., Leskіv, S., & Yuzevych, V. (2017). Rozrobka informatsiinoho zabezpechennia avtomatyzovanoi systemy monitorynhu stanu promyslovoi bezpeky hazotransportnoi systemy [Development of Information Support of the Automated System for Monitoring the State of the Gas Transportation System’s Industrial Safety]. Path of Science, 3(8), 3028–3035. doi: 10.22178/pos.25-8 (in Ukrainian)
[Скриньковський, Р., Леськів, С., & Юзевич, В. (2017). Розробка інформаційного забезпечення автоматизованої системи моніторингу стану промислової безпеки газотранспортної системи. Path of Science, 3(8), 3028–3035.

[Google Scholar] [CrossRef]

2. Ministry of Regional Development of Ukraine. (2008). Mahistralni truboprovody. Nastanova. Vyznachennia zalyshkovoi mitsnosti mahistralnykh truboprovodiv z defektamy [Main pipelines. Attitude. Determination of the residual strength of main pipelines with defects] (DSTU-Н Б В.2.3-21:2008). Kyiv: Author (in Ukrainian)
[Міністерство регіонального будівництва України. (2008). Магістральні трубопроводи. Настанова. Визначення залишкової міцності магістральних трубопроводів з дефектами (ДСТУ-Н Б В.2.3-21:2008). Київ: Мінрегіонбуд].

3. The State Committee for Technical Regulation and Consumer Policy. (2003). Truboprovody stalevi mahistralni. Zahalni vymohy do zakhystu vid korozii [Steel pipe mains. General requirements for corrosion protection] (DSTU 4219-2003). Kyiv: Derzhspozhyvstandart Ukrainy (in Ukrainian)
[Державний комітет України з питань технічного регулювання та споживчої політики. (2003). Трубопроводи сталеві магістральні. Загальні вимоги до захисту від корозії (ДСТУ 4219-2003). Київ: Держспоживстандарт України].

4. Ministry of Regional Development of Ukraine. (2003). Truboprovody stalevi pidzemni system kholodnoho i hariachoho vodopostachannia. Zahalni vymohy do zakhystu vid korozii [Underground steel pipelines of the cold and hot water-supply systems. General requirements for corrosion protection] (DSTU B В.2.5-30:2006). Kyiv: Author (in Ukrainian)
[Міністерство регіонального будівництва України. (2003). Трубопроводи сталеві підземні систем холодного і гарячого водопостачання. Загальні вимоги до захисту від корозії (ДСТУ Б В.2.5-30:2006). Київ: Мінрегіонбуд].

5. International Organization for Standardization. (1998). Corrosion of metals and alloys – Corrosion fatigue testing – Part 1: Cycles to failure testing (ISO 11782-1:1998.). Geneva: ISO.

6. International Organization for Standardization. (1998). Corrosion of metals and alloys – Corrosion fatigue testing. – Part 2: Crack propagation testing using precracked specimens (ISO 11782-2:1998). Geneva: ISO.

7. International Organization for Standardization. (2012). Corrosion of metals and alloys – Stress corrosion testing – Part 1: General guidance on testing procedures (ISO 7539-1:2012). Geneva: ISO.

8. International Organization for Standardization. (1995). Corrosion of metals and alloys – Evaluation of pitting corrosion (ISO 11463:1995). Geneva: ISO.

9. Yuzevych, L., Skrynkovskyy, R., & Koman, B. (2017). Development of information support of quality management of underground pipelines. EUREKA: Physics and Engineering, 4, 49–60.

[Google Scholar] [CrossRef]

10. Ibragimov, A. (2011). Metody prognozirovanija dolgovechnosti truboprovodov s uchetom korrozii i peremennyh naprjazhenij [Methods for predicting the durability of pipelines taking into account corrosion and variable stresses]. A. Shabarov, S. Podorozhnikov (Eds.). Tjumen': TjumGNGU (in Russian)
[Ибрагимов, А. (2011). Методы прогнозирования долговечности трубопроводов с учетом коррозии и переменных напряжений. А. Шабаров, С. Подорожников (Ред.). Тюмень: ТюмГНГУ].

[Google Scholar]

11. Valiashek, V., Kaplun, A., & Yuzevych, V. (2015). Matematychne ta kompiuterne modeliuvannia fizychnykh kharakterystyk materialu u vershyni trishchyny z urakhuvanniam efektu zmitsnennia [Mathematical and computer modeling of physical characteristics of material in top of crack taking into account effect of strengthening]. Kompiuterno-intehrovani Tekhnolohii: Osvita, Nauka, Vyrobnytstvo, 18, 97–104 (in Ukainian)
[Валяшек, В., Каплун, А., & Юзевич В. (2015). Математичне та комп’ютерне моделювання фізичних характеристик матеріалу у вершині тріщини з урахуванням ефекту зміцнення. Комп’ютерно-інтегровані технології: освіта, наука, виробництво, 18, 97–104].

[Google Scholar]

12. Dzhala R., Verbenets, B., & Melnyk, M. (2012). Kontrol poliaryzatsiinoho potentsialu pidzemnykh metalevykh sporud [Control of the polarization potential of underground metal structures]. Retrieved from http://ipm.lviv.ua/library/0/62/UkrNDT-2012part02.pdf (in Ukrainian)
[Джала Р., Вербенець, Б., & Мельник, М. (2012). Контроль поляризаційного потенціалу підземних металевих споруд. URL: http://ipm.lviv.ua/library/0/62/UkrNDT-2012part02.pdf].

13. TrubaSpets. (n. d.). Varianty katodnoj zashhity truboprovodov – preimushhestva i nedostatki sposobov [Variants of cathodic protection of pipelines - advantages and disadvantages of methods]. Retrieved August 5, 2017, from http://trubaspec.com/montazh-i-remont/varianty-katodnoy-zashchity-truboprovodov-preimushchestva-i-nedostatki-sposobov.html (in Russian)
[ТрубаСпец. (n. d.). Варианты катодной защиты трубопроводов – преимущества и недостатки способов. Актуально на 5.08.2017. URL: http://trubaspec.com/montazh-i-remont/varianty-katodnoy-zashchity-truboprovodov-preimushchestva-i-nedostatki-sposobov.html].

14. Sopruniuk, P., & Yuzevych, V. (2005). Diahnostyka materialiv i seredovyshch. Enerhetychni kharakterystyky poverkhnevykh shariv [Diagnostics of materials and environments. Energy characteristics of the surface layers]. Lviv: SPOLOM (in Ukrainian)
[Сопрунюк, П., Юзевич, В. (2005). Діагностика матеріалів і середовищ. Енергетичні характеристики поверхневих шарів. Львів: СПОЛОМ].

[Google Scholar]

15. Koman, B., & Yuzevich, V. (2015). Energy Parameters of Interfacial Layers in Composite Systems: Graphene – (Si, Cu, Fe, Co, Au, Ag, Al, Ru, Hf, Pb) and Semiconductor (Si, Ge) – (Fe, Co, Cu, Al, Au, Cr, W, Pb). Journal of Nano- and Electronic Physics, 7(4), 04059-1–04059-7.

[Google Scholar]

16. Yuzevych, V., Koman, B., & Dzhala, R. (2016). Mechano-electric characteristics of the near-surface layer of some materials. Journal of Nano- and Electronic Physics, 8(4), 04005-1–04005-7.

[Google Scholar]

17. Pakhalovych, M. (2017). Udoskonalennia normatyvnykh dokumentiv z bezpechnoi ekspluatatsii elementiv truboprovidnykh system atomnykh elektrostantsii u ponadproektnyi termin [Improvement of normative documents on safe operation of elements of pipeline systems of nuclear power plants in excess of the project term] (Doctoral thesis). Kharkiv: Ukrainska inzhenerno-pedahohichna akademiia (in Ukrainian)
[Пахалович, М. (2017). Удосконалення нормативних документів з безпечної експлуатації елементів трубопровідних систем атомних електростанцій у понадпроектний термін (Автореферат дисертації). Харків: Українська інженерно-педагогічна академія].

18. Pokhmurskyi, V., & Khoma, M. (2008). Koroziina vtoma metaliv i splaviv [Corrosive fatigue of metals and alloys]. Lviv: Spolom (in Ukrainian)

[Похмурський, В., & Хома, М. (2008). Корозійна втома металів і сплавів. Львів: Сполом].

[Google Scholar]

19. Milella, P. P. (2013). Fatigue and Corrosion in Metals. Milan: Springer. doi: 10.1007/978-88-470-2336-9

[Google Scholar] [CrossRef]

20. Kharchenko, Ye., Klysh, S., Paliukh, V., Kunta, O., & Lenkovskyi, T. (2016). Vplyv tryvaloi ekspluatatsii hazoprovodu na tsyklichnu trishchynostiikist stali 17H1S [The influence of gas pipeline long-term operation on fatigue crack growth resistance of 17Г1С steel]. Physicochemical Mechanics of Materials, 52(6), 75–80 (in Ukrainian)
[Харченко, Є., Клиш, C., Палюх, В., Кунта, О., & Ленковський, Т. (2016). Вплив тривалої експлуатації газопроводу на циклічну тріщиностійкість сталі 17Г1С. Фізико-хімічна механіка матеріалів, 52(6), 75–80].

21. Revie, W. R. (Ed.). (2015). Oil and Gas Pipelines: Integrity and Safety Handbook. Hoboken: John Wiley & Sons Inc.

[Google Scholar] [CrossRef]


Article Metrics

Metrics Loading ...

Metrics powered by PLOS ALM

Refbacks

  • There are currently no refbacks.




Copyright (c) 2017 Ruslan Skrynkovskyy, Larysa Yuzevych, Mykola Mykyychuk

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.